How to Install a Ghost Immobiliser
A ghost immobiliser is a hidden security device that protects your car from hacking and key cloning. It prevents the engine from starting until a PIN code is entered. It can be as long as 20 characters.
It is not detected by thieves who don't expect this extra layer of security. Certain systems also come with an application that allows owners to disarm the immobiliser in case they forget their PIN code or to switch to the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an innovative security system that can be integrated into your vehicle's ECU offering a secure protection against thieves. It is extremely efficient and user-friendly. This makes it an excellent addition to your vehicle's security arsenal. However, like any anti-theft device, it is not foolproof and requires regular maintenance to ensure its operation. Fortunately, this guide will aid you in getting the most benefit from the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial network that lets microcontrollers communicate with one another across short distances without the necessity of central control units. It is designed for multiplexing electrical wiring inside vehicles to save on copper and has a number of advantages, including low costs and easy use.
In modern vehicles in modern vehicles, the CAN protocol is used to communicate with various systems, including the engine management system (EMS) steering module, transmission controller as well as air conditioning controls and many more. It also carries sensor information like speed sensors, as well as other inputs, to control the car's various features. The CAN bus is used to monitor these various components, and it can stop a vehicle from starting if they're in an unsafe state.
While the CAN bus can be utilized for a variety of reasons, it's essential to know how it functions and how it's secured. It is possible to add new features to vehicles using CAN bus, however it is important to protect it against hackers and other threats. The best method to do this is by installing firewalls and monitoring your CAN bus using software.
Ghost2's discreet control unit is concealed in the wiring harness or dashboard, eliminating the possibility of a burglar physically tampering with it. It is impossible to reset a pin code or an emergency code without having access to the car.
You can enable Transport Mode if you need to surrender your vehicle for valet parking, service or any other reason. This feature turns off both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only reactivate after the car has reached 31 mph for a time of 15 minutes.
How do I create a PIN code
The Ghost immobiliser is a robust security system that protects your vehicle from theft. The revolutionary technology utilizes an PIN to disable the vehicle's engine and prevent it from starting if you don't have the correct code, or an authorized fob or mobile. The system's sleek design makes it virtually invisible and offers unrivaled security against theft. The system is TASSA-certified and could save you substantial sums on your car insurance.
During installation, Ghost enters a "learning mode" to record the sequence of buttons that are that are pressed to create unique pin codes. The installer will guide you through activating the system after the pin code is created. Once activated it will Ghost system will turn off the starter motor of your vehicle until a valid pin code is entered or the vehicle is switched into transport mode. This makes it very difficult for thieves or cloners to hack into or duplicate the starter system of your vehicle.
Installing an Ghost immobiliser is easy but it is crucial to follow the specific instructions in the user's guide to ensure proper operation. Multimeters and basic hand tools can be used to check electrical values. Insulation tape and heat shrink tubing may protect exposed wiring, while cable tie-ups are crucial to keep everything neat and secure. Also, make sure to check the system frequently to spot any potential issues and errors.
Once the installation has been completed it is crucial to conduct a final test of the system before switching on the ignition of your vehicle. The Ghost immobiliser will arm itself after 3 to 30 seconds, depending on your vehicle's model. The system also comes with a Service/Valet mode that allows you to temporarily disable the system while you are servicing your vehicle or parking valet.
Ideally, the immobiliser should be hidden in a discreet location beneath the steering wheel or dashboard. Make use of a small piece of duct tape or paint on the wires CAN H and L to make them easier to find during testing. The CAN H and the L wires must also be connected to an electrical source that provides continuous 12V. It is also essential to check the connections again after testing, since misidentifying these wires can cause the system to fail.
Activating the system
A ghost immobiliser blocks your car from starting until you press a few buttons inside the vehicle, usually on the steering wheel or door panel, or the central console. The sequence can be changed by the user at any time. Once activated, the system cannot be deactivated. This makes it an ideal choice for anyone looking to protect their vehicle from theft.
The device is not designed to be detectable by modern diagnostic and code-grabbing techniques. It does not emit radio frequencies either which makes it harder for thieves to identify.
If the device is detected, it will stop the engine from running and sound a loud alarm to scare off thieves. The device can be used to track the location of a car and aid in the search for the vehicle if it has been taken.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in a Ghost immobiliser. We are certified to install ghost immobilisers for your vehicle. We will ensure that it is concealed in an area that is hard to reach. We can also provide additional security measures, such as an ignition lock for your wheel and a kill switch to protect your vehicle from thieves.
Disarming Ghost 2 immobiliser is important to know how to deactivate a Ghost immobiliser if it is fitted to your car. This will aid you in the case that you lock your keys in the car or when your battery dies. The system is based on a unique PIN code that only you know, and the immobiliser will not be able to start your vehicle without entering this code. Pressing a combination buttons on the steering wheel or on the dashboard is the simplest method to enter your code. This is a lot easier than using a key fob, and stops others from copying your remote.
Ghost2 is noninvasive, unlike some aftermarket immobilisers which require cutting wires for installation. It also works with the CAN bus system of your vehicle in order to function. Its standout characteristic is its ability to bypass the engine without impacting your vehicle's normal functions, making it impossible for thieves to use signal boosters to copy your car keys. Moreover, it does not emit radio frequencies, so thieves aren't able to detect the system.
The Ghost system has an option called Transport Mode which allows you to temporarily disable security for certain situations such as transportation or service. This feature is ideal when you're lending your vehicle out to someone else, without sharing your PIN code, or if your vehicle needs to be protected while you drive it. To activate Transport Mode simply press the service button five times within a period of 2 seconds. The Ghost system will confirm activation by giving five indication signals.
When you're done, remember to save the emergency code in a secure location outside of your vehicle. If you are ever locked out of your vehicle you can contact the technician or company who installed the system, and they'll provide you with the code. If you cannot reach them then you can attempt to contact an authorized dealer but this would require verification procedures and could incur additional charges.
This system isn't just practical, but it can also help protect your vehicle from theft and reduce insurance costs. Numerous insurance companies offer reduced rates or financial incentives to install this anti-theft system.